Mini Spring Clamp Set - 20 Piece
Woodcraft SupplyWoodcraft Supply
3.0

Mini Spring Clamp Set - 20 Piece

USD 8.49

Description

These polymer mini spring clamps offer a convenient extra hand when needed. Made of tough polymer material that will truly stand the test of time.Features:1" Capacity for the openingTough pivoting clamp edges ensure a rock-solid gripMini-Clamps are perfect for smaller spaces for a multitude of usesReach for one any time you need an extra handPack of 20 means you should never run outSpecifications:Capacity: 1"What's Included:(20) Bora® Mini Spring Clamps

Woodcraft Supply deal

You could save on Woodcraft Supply Mini Spring Clamp Set - 20 Piece with a Woodcraft Supply promo code:

    Woodcraft Supply logo

    10 OFF

    1 uses
    high

    worked 8 months ago

    Save $10 off with coupon code on $40+ orders
View all Woodcraft Supply coupons and promo codes

More Woodcraft Supply Products

Precision Benchtop Portable Router Table, # PRS2100

Precision Benchtop Portable Router Table, # PRS2100

KREG’s redesigned Precision Benchtop Router Table features Easy-Slide™ high-pressure laminate covering a MDF core top with CNC machined 9-1/4" x 11-3/4" opening to fit the new 3-ring phenolic insert plate and standard miter track. The sturdy steel stand has splayed legs for sure-footing and lower braces that are pre-drilled for adding a shelf or enclosing the stand for dust control. The extruded aluminum fence has been upgraded with cam clamps for fast, secure fence positioning and includes adjustable sub-fences for offset jointer routing, bit guard and 2-1/2" dust port. Includes: 1", 1-3/16" and 2-5/8" Level-Loc reducing rings, Level-Loc wrench, removable brass starting pin and detailed instructions for mounting your router.Features:• 16" x 24" x 1" thick MDF core top with high-pressure laminate• New 3-ring phenolic insert plate with alignment marks to center mount any router• 15-1/2" tall steel stand with splayed legs and lower braces for adding a shelf• Upgraded extruded aluminum fence with cam clamps for secure fence positioning• Includes: three Level-Loc reducing rings, Level-Loc wrench and brass starting pin

USD 249.99

13" Planer/Molder with Closed Stand - 1-1/2 HP 1 Ph 115/230V - Straight Knife - JWPM-13CS

13" Planer/Molder with Closed Stand - 1-1/2 HP 1 Ph 115/230V - Straight Knife - JWPM-13CS

The Jet® JWPM-13CS 13" Closed Stand Planer / Molder boasts a 1-1/2 HP motor. The sturdy cast iron table and base provide strength and reduce vibration during use. The three-knife cutter head design produces a superior finish. Built-in lockable caster adds support and stability to the machine while allowing it to be maneuverable. One of the standout features of the JWPM-13CS is its molder head, which will enable you to create custom moldings and trim pieces easily. The molding cutter head accommodates over 40 standard molding cutter sets. You can install most 2" or smaller heads without removing the planning knives, saving valuable setup time. Overall, the Jet JWPM-13CS is a top-of-the-line machine with exceptional performance and versatility. It is built to last and will be a valuable addition to any woodworking shop.Features:Cast iron table and base provide strength and reduce vibration during useFour precision-ground column design feature adds stability when raising and lowering the tableTwo speed gear box has feed rates set for optimum planing and molding resultsThree cutter head design produces a superior finish in either applicationMolding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planning knives to save you set-up timeInfeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the woodTop-mounted height adjustment handle is easy to use for quick table height changesTotally enclosed fan-cooled 1-1/2HP motor uses two matched V-belts to deliver smooth, consistent power to the cutter headExclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removalBuilt-in lockable casters add support and stability to machine while in useSpecifications:Type: Straight Knife CutterheadStyle: Floor Standing ModelMotor Type: TEFC - Totally Enclosed, Fan-Cooled, inductionMotor Power: 1-1/2 HPMotor Phase: Single (1 Ph)Motor Voltage: 115/230 VCycle: 60 HzPrewired Voltage: 115 VMotor Current: 15A / 7.5 ANumber of Knives: 3Knife Size (L x W x H): 13-1/16" 1/8" x 5/8"Cutterhead Speed: 4500 RPMCutterhead Diameter: 2-9/16"Maximum Planing Width: 13"Maximum Planing Thickness: 6-1/8"Full Width Depth of Cut: 1/16"Minimum Planing Length: 14"Cuts Per Minute: 13500Feed Rate - Planing: 20 FPMFeed Rate - Molding: 10 FPMDust Port Diameter: 4"Minimum Dust Extraction Volume Required: 350 CFMOverall Dimensions (W x D x H): 23-31/32" x 36-1/2" x 43-1/2"Net Weight: 225 lbs.What's Included:(1) Jet® 13" JWPM-13CS Planer/Molder - 1-1/2 HP 1 Ph 115/230V - Straight KnifeShipping / Billing Information All shipments must be inspected and any damage reported within 3 days of receipt.Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges. This product ships direct from the manufacturer: Your order will ship in 7-10 business days. This product is considered special order. Your account will be charged when you place your order. Express or overnight shipping is not available for this product. Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries. Return Information All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.

USD 1699.99

Lignum Vitae Dimensional Lumber

Lignum Vitae Dimensional Lumber

Lignum Vitae (Bulnesia sarmientoi) heartwood is dark greenish brown to almost black and sharply demarcated from the pale yellow or cream-colored sapwood. The texture is very fine; grain is strongly interlocked; a slight scent is evident when warmed or rubbed. It has a characteristic oily feel due to the resin content that may be as high as one-fourth of the air-dry weight making it difficult to glue. With sharp tools and patience, it turns well but due to its high resin content, sandpaper will quickly clog up. The resin is also responsible for its poor gluing properties and synthetic glues will get the best results. Common uses for Lignum Vitae include tool handles, mallet heads, bearings, bushings, bandsaw blocks, pulley wheels and turned objects.Features:Known to be one of the hardest and heaviest woodsSuitable for outdoor use and resistant to insect attackPolishing is the only effective finishing treatmentNative to Central America and northern South AmericaSpecifications:Thickness: 3/4"Width: 1-1/2"Length: 12"What's Included:(1) Lignum Vitae - 3/4" x 1-1/2" x 12" - Dimensional LumberNotes:Wood is a product of nature, and as such, no two pieces are alike to start with, the same wood growing in different locales can vary greatly even though it is the exact same species.Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.Cut from quality, kiln-dried stock. The grain runs with the longest dimension.Thin Stock is sawn to +/- 1/8" of the listed size.Carving and Turning Blocks are sawn to +/- 1/4" of the listed size.Plywood sizes are nominal, the dimensions are +/- 1/8" of the listed size.Larger blocks are sawn to +/- 1/4" of the listed size.Smaller blocks are sawn to +/- 1/8" of the listed size.Spindle stock, or stock that is 1-1/2" - 2" wide is sawn to +/-1/8" of the listed size.

USD 12.99

13" Planer with Helical Head

13" Planer with Helical Head

Oliver Machinery has made the industry’s best benchtop planer even better. The new 10045 Benchtop Planer has many updated features based on customer feedback from the previous 10044 version, including 13" cutting capacity, two-speed gearbox, Oliver HCX helical shearing cutterhead, heavy-duty power switch with lockout, adjustable feed tables and more. These improvements will keep the 10045 benchtop planer at the top of the industry category.New Features:13" cutting capacityTwo-speed gearbox for different feed ratesAuthentic Oliver HCX helical shearing cutterheadSteel top and carry handlesHeavy-duty power switch with lockoutAdjustable infeed/outfeed tablesAdditional Features:Powerful 2 HP 1 PH 15A 115V motor4-post design ensures cutter head alignment to tableBuilt-in carriage lock for stability during operationWixey Digital Readout (DRO)Elevation crank includes an easy-to-read scaleOn-board adjustment wrench storage4-depth stops for easy set-up from ¾" to 5/32"Front material removal gauge allows for quicker setupFold-up extension wings for easy storageBuilt-in carry handles for easy portabilityBlower assists in chip ejection during operationDust port allows 2-1/2" or 4" hose hook upSafety switch features overload protection and lock-outCSA listedSpecifications:Stock Number: 10045.201Cutterhead: Oliver HCX HelicalPhase: 1 PHMaximum Stock Width: 13"Maximum Depth of Cut: 3/32"Maximum Stock Thickness: 6"Minimum Stock Thickness: 5/32"Minimum Stock Length: 8"Dust Port Diameter: 4" and 2.5"Feed Speeds: 17 FPM or 26 FPMTable Size: 13" x 10.2"Cutterhead Speed: 10,000 RPMNumber of Knives (Helical): 36Motor: 2 HPNet Weight: 72 lbGross Weight: 82 lbWhat’s Included:(1) 13" Benchtop Planer(1) Torx Wrench(1) 5-Pack Carbide Inserts and ScrewsShipping / Billing Information This product ships direct from the manufacturer: Your order will ship in approximately 5 business days. This product is considered special order. Your account will be charged when you place your order. Express or overnight shipping is not available for this product.Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries. Return Information Returns are accepted by Oliver Machinery within 30 days of receipt. Return Materials Authorization (RMA) required prior to return. A 20% restocking fee will be applied. Customer responsible for return freight. Contact Woodcraft Customer Service for return assistance at 1-800-225-1153. Warranty Information Oliver Machinery warrants its products to the original customer as free from defects for a period of two years on parts and 1 year for the electronics and motor.

USD 999.99

You May Also Like