Woodcraft Supply Promo Codes and Coupons September 2025

Mortised Box Lid Support

This finely crafted support is mortised into the side of your box with no interference with the interior space. Clean sides allow for perfect fitting trays. Solid brass. Mortise is approximately 1/4" W x 2-7/8" L x 1/2" D. Brusso Incorporated was originally founded by a custom cabinet and furniture maker who was frustrated with the low quality of hardware that was available to him at the time. He started to design and manufacture a product that met his own high expectations - the result is a beautiful and functional line of hardware.Now made by Nanz Custom Hardware, each piece is still precision machined from solid brass stock with a luster provided by a high copper content. Only premium quality materials, such as stainless steel hinge pins, balls and springs, are used. Each piece is designed with the box maker or cabinet maker in mind with traditional styling and elegant lines for easy installation.JB-250Small mortised lid supportBrusso - a beautiful and functional line of hardwareDesigned with the box maker or cabinet maker in mindTraditional styling and elegant lines for easy installation

Pepper Mill Grinder Turning Kit Mechanism - Stainless Steel

WoodRiver® Pepper Mill Grinder Kits offer quality and flexibility. Our kits feature tempered stainless steel mechanisms that provide a lifetime of grinding and come in four different shaft lengths that offer flexibility. No need to struggle with what length to make your mill – with 6", 8", 10", and 12" shaft lengths available, you have ultimate control over the size of your mill. Most grinder kits require a precisely bored-through hole, but the unique mounting hardware of our kit allows slight inaccuracies in your turning. Easy to assemble and install, these mechanisms can be adjusted from extra coarse to an extra fine grind by turning the knurled “P” knob on top of the mill. Kit comes complete with instructions and all hardware to make one Pepper Mill. Features:Tempered stainless steel mechanisms6”, 8”, 10”, 12” long shafts offer maximum flexibilityEasy to assemble and installFully adjustable for the desired grindWhat's Included:(1) WoodRiver Pepper Mill Grinder Turning Kit Mechanism - Stainless SteelNotes:In addition to this kit, a completed pepper mill grinder requires 3" x 3" turning stock, 7 mm brad-point bit, 1-1/16" and 1-5/8" Forstner bits, Salt and Pepper Mill Jamb Chucks, all sold separately.

Coffee Scoop Turning Kit

WoodRiver® offers the perfect kit for the coffee fanatic in your life. This easy-to-make kit will brings smiles for years to those loved ones in your life every morning as they use this scoop to make the perfect cup of java. Each scoop is equal to one tablespoon. Simply bore a 1/4" diameter x 13/16" deep hole, mount between centers then turn your desired profile. Choose from our large selection of wood and man made blanks to create your one-of-a-kind scoop.Features: Great gift ideaExcellent beginner’s kitHeavy-duty and durableHandle can be turned from a pen blank (not included) Specifications:Finish: Gold PlatingScoop Size: 1 TablespoonWhat's Included:(1) WoodRiver - Coffee Scoop Turning Kit - Gold (scoop portion only)Notes:Blank material not included.

Ice Cream Scoop Turning Kit

Sweet treats deserve a sweet scoop! Constructed from 304 Stainless, this heavy-duty WoodRiver® Ice Cream Scoop features a hawk bill point designed to cut through the hardest of ice creams, a 3/8" x 1-3/8" 16 TPI threaded post and a beefy ferrule to cap it all off. Our scoop is designed to seal off the end of your turned handle so that no grain is exposed to the elements. This is an easy and fun project to make that will last for a lifetime.Features:Hawk bill point scoop is designed to cut through the hardest of ice creamsConstructed from 304 stainlessTough durable designNo exposed end grain to get wetSpecifications:Material: 304 Stainless steelThreaded Post Dimensions: 3/8" x 1-3/8" x 16 TPIWhat's Included:(1) Hawk Point Ice Cream Scoop(1) FerruleNotes:In order to construct a completed ice cream scoop, you will also need turning tools, a minimum of 1-3/4" x 1-3/4" x 6" turning stock, 3/8" or 9 mm brad point drill bit (#149126, sold separately), five-minute epoxy and your choice of a finishing product.

Mini Spring Clamp Set - 20 Piece

These polymer mini spring clamps offer a convenient extra hand when needed. Made of tough polymer material that will truly stand the test of time.Features:1" Capacity for the openingTough pivoting clamp edges ensure a rock-solid gripMini-Clamps are perfect for smaller spaces for a multitude of usesReach for one any time you need an extra handPack of 20 means you should never run outSpecifications:Capacity: 1"What's Included:(20) Bora® Mini Spring Clamps

Argentine Osage Orange Wood Turning Stock

Equalizer Table Slide - Pair

Choose Osborne Equalizer Table Slides to create expanding tabletops for those that are supported on a single pedestal. Equalizer slide incorporates a rack and pinion system to ensure that the tops open and close easily while staying in balance. The slide develops a camber to compensate for sagging at the ends of the table.It is important to use the correct table slide. To calculate the best length of the table slide for your table, measure the length of the table when it is fully closed, without the leaves. The table slide should be no shorter than half the length of the table when it is fully closed. Constructed in 3 pieces. Accepts two (2) 12" leaves. Eight (8) pre-drilled holes per slide for table top installation. Table top mounting screws not included.25-1/2" openingOverall size: 26" x 2-3/8"Length (Fully Extended): 50"Width (Closed): 3"For use with single pedestal table basesSold as a pairSoft Maple

Black Plastic and Black Felt Pen/Pencil Case

Add value and show off the beauty of your work. Display, sell, or present your handcrafted pen or pencil in this handsome WoodRiver® case. Black plastic case features a felt exterior, along with a felt upper and lower interior liner and an interior retainer sash to keep your pen or pencil securely in place. Dimensions: 6-7/16" long x 2-1/2" wide x 1" tall. Pen not included. Features:Use for single- or double-barreled pens and pencilsAdd value and show off the beauty of your pen or pencilGreat for displaying pens or pencils at craft fairs and trade showsSpecifications:Size: 6-7/16" long x 2-1/2" wide x 1" tall Material:Black feltWhat's Included: (1) Black Plastic and Black Felt Pen/Pencil Case