Well-Rite WR-120 Well Pressure Storage Tank Steel 33.4 Gal
FreshWaterSystemsFreshWaterSystems
4.0

Well-Rite WR-120 Well Pressure Storage Tank Steel 33.4 Gal

USD 359.00

Description

The Well-Rite WR-120 Well Pressure Tank is a diaphragm type pre-charged hydro-pneumatic tank designed for residential and commercial water well, pressure booster, irrigation and reverse osmosis systems. The unique design of the WR-120 well water storage tank prevents tank corrosion and reduces wear and tear on your well pump. Features: Stainless steel system connection Brass Air Valve with o-ring seal Controlled Action Diaphragm maximizes drawdown Heavy duty butyl diaphragm Appliance quality urethane paint for indoor or outdoor installation Drawdown 30/50 Setting: 11.3 gallons 5 year warranty NSF Standard 61 listed Compatible with the following tanks: Well-X-Trol WX-203 Wel-Flo WF100 Goulds V100 Sta-Rite PSP75T-T03 Sta-Rite PS32-T05 Flex2Pro WWT-35 Champion CH800 How 2 Tank HT32 Sta-Rite PSP32-T05 A.O. Smith SSB-32, PM-32 Flex2Pro H2P-35 Reverse Osmosis Tank Maintenance and Accessories: A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve. For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance. The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer. NOTE: The Well-Rite WR-120 33.4 gallon storage tank can be used for reverse osmosis or well pressure tank applications. The stainless steel connection and fully enclosed polypropylene & butyl water reservoir avoids leaching issues. The air pre-charge is factory set at 38 psi for well tank applications and should be reduced to 7 PSI for RO applications.

Get a discount on Well-Rite WR-120 Well Pressure Storage Tank Steel 33.4 Gal

You could save on FreshWaterSystems Well-Rite WR-120 Well Pressure Storage Tank Steel 33.4 Gal with a FreshWaterSystems promo code:

    FreshWaterSystems logo

    10% off

    3 uses
    high

    worked 5 months ago

    Score 10% off with coupon
View all FreshWaterSystems coupons and promo codes

More FreshWaterSystems Products

Pentek 10" Slim Line Water Filter Housing Blue/Clear w/ PR

Pentek 10" Slim Line Water Filter Housing Blue/Clear w/ PR

Pentek 10" Slim Line Water Filter Housing features a blue reinforced polypropylene cap and a clear Styrene-Acrylonitrile (SAN) sump. The sump is annealed (heat treated) to relieve stress, add clarity and increase strength. Pentek clear slim line housings offer on-site examination of flow, performance and cartridge life

USD 16.83

John Guest Stem Barb Connector - 1/4 OD Stem x 5/16 ID Barb

John Guest Stem Barb Connector - 1/4 OD Stem x 5/16 ID Barb

The John Guest stem adapter makes connecting hose to Push-fit fittings quick and easy. Manufactured in gray acetal, these adapters are suitable for foodstuff and potable liquids. They are also suitable for air and inert gases therefore can be used for CO2 and nitrogen beverage gas lines, pneumatics, vacuum as well as other applications. Features: Push-fit Technology creates reliable, leak-free connections Stem easily inserts into JG Push-fit fittings to make a permanent swivel connector Compatible with plastic or copper OD sized tubing Connect, disconnect, and reconnect in seconds without tools Food Quality and suitable for potable liquids and pure water applications Can be used for air/pneumatic & vacuum applications Acetal body Made with lead free materials Working pressure and temperature:  Max. 150 psi at 68° F Max. 100 psi at 150° F JG gray acetal is suitable for both compressed air and water (buna-n seal).

USD 0.88

John Guest Union Connector - 3/8

John Guest Union Connector - 3/8

The John Guest union connector makes connecting OD tubing sizes quick and easy. Manufactured in gray acetal with food grade nitrile O-ring, these fittings are suitable for foodstuff and potable liquids. They are also suitable for air and inert gases therefore can be used for CO2 and nitrogen beverage gas lines, pneumatics, vacuum as well as other applications. Features: Push-fit Technology creates reliable, leak-free connections Used to connect OD tubing sizes Compatible with plastic or copper OD sized tubing Connect, disconnect, and reconnect in seconds without tools Food Quality and suitable for potable liquids and pure water applications Can be used for air/pneumatic & vacuum applications Acetal body with Nitrile O-Ring Made with lead free materials Working pressure and temperature:  Max. 150 psi at 68° F Max. 100 psi at 150° F JG gray acetal is suitable for both compressed air and water (buna-n seal).

USD 2.03

John Guest Union Connector Polypro - 1/4

John Guest Union Connector Polypro - 1/4

The John Guest union makes connecting OD tubing sizes to female NPT threads quick and easy. Manufactured in polypropylene with food grade EDPM O-ring, these fittings were developed for the filtered pure water market. Features: Push-fit Technology creates reliable, leak-free connections Used to connect OD tubing sizes  Compatible with plastic or copper OD sized tubing Connect, disconnect, and reconnect in seconds without tools Food Quality and suitable for potable liquids and pure water applications Polypropylene body with EDPM O-ring Made with lead free materials Working pressure and temperature:   Max. 150 psi at 70° F Max. 60 psi at 140° F Note: Not suitable for compressed air and vacuum applicationsPolypropylene (PP) fittings are for water only. Material is too soft and seal is EPDM for compressed air applications.

USD 1.39

You May Also Like

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set This two-cup and teapot combo packs light for travel and looks beautiful on a desk at home or at work. The set features: One teapot, complete with lid and built-in filter; Two nicely-sized cups that fit snug on top and bottom of the pot; Carrying case for travel and storage; Circular wooden button-style handles; Small rectangular tea towel. When I worked in Beijing at the Nature Conservancy, I saw a lot of office workers would keep a cup-pot combo on hand so they could brew great tea without cluttering up their work space. Needless to say, I got one myself too. It’s a great fit for: Home-office tea-making; Picnic/travel tea-making; Tea friends with less space for storing tea equipment; Tea Party Size? This set is best for personal use or with one partner (1-2 people).   @yourteaguy Would you the cup pot combo? #tea #teatime #celtics #basketball #teapot #happytime #jessesteahouse ♬ Pieces (Solo Piano Version) - Danilo Stankovic       Save on tea with this teapot! Purchase the pot and sampler combo from the drop-down menu above to save $5 on a tea sampler! Jesse’s Review: This cup-pot combo is straight-up a great way to make tea. It’s very practical and yet the results are still top-tier. If you don’t have the space, time, or energy for a full Gongfu-style tea set, this is for you. I keep one of these on my desk at home in case I need to really get work done and can’t do the whole tea ceremony, and I also have a second set just for traveling and taking to friends’ houses. One note - because this set doesn’t come with a pitcher, you need to be sure to only add as much water as you need to drink your next cup. Otherwise, you will be left with extra tea inside the pot which keeps over-steeping. Don’t Forget Your Tea Pets! It’s not gongfu tea time without a tea pet! Check out the tea pets and add one to your order!   Jesse's Quality Guarantee! When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 40.00

Jesse's Teahouse
Jesse's Teahouse