BETAFPV Promo Codes and Coupons September 2025

BETAFPV

BetaFPV is a leading manufacturer and retailer of micro FPV drones, components, and accessories. Founded in 2016, they specialize in producing high-quality mini quadcopters, whoop-style drones, and FPV equipment for both beginners and experienced pilots. The company is known for their innovative designs and reliable customer service in the drone racing community.

betafpv.com

Today's BETAFPV discount codes

TOP PICK

5% off

5292 uses

high

worked 4 days ago

5% Off Storewide at BETAFPV

20% off

1594 uses

high

worked 6 months ago

20% Off Select Catgories at BETAFPV

10% off

1336 uses

high

worked 4 days ago

10% Off Meteor65 Lite Brushless Whoop Quadcopter at BETAFPV

5% off

599 uses

high

worked 4 days ago

5% Off Pavo360 Fpv Quadcopter at BETAFPV

Featured BETAFPV Products

Pavo Pico Brushless Whoop Quadcopter

Thanks to all the enthusiastic pilots who participated in the BETA TEST before, we've now released the smallest 2S about 100g DJI O3 Cinewhoop! This ultra-light cinewhoop with a small wheelbase is not only equipped with 45mm propellers but also the latest F4 2-3S 20A AIO FC V1 which greatly heightens the flying experience. Due to Its split design HD VTX mounting bracket, it supports quick installation of mainstream HD digital VTX modules and a rubber damper vibration-damping design with GyroFlow stabilization software ensures stable and smooth HD images. Its design is well-suited for cruising indoors and outdoors alike. We upgraded the FC board since the second batch, details are below: Stable 9V 2A BEC power for the DJI O3 HD VTX, preventing disruptions caused by low battery voltage. Improve ESC to 20A and a peak current of 25A, allowing it to handle special situations like motor blockage or stalling. Connector for DJI O3 HD VTX and USB port for easy installation and maintenance. For more details, check the Flight Controller paragraph. Note: The Camera and HD Digital VTX(DJI O3 HD Digital VTX, Walksnail Avatar HD Digital VTX, and Vista HD Digital VTX) are not included in all packages. you need to buy them separately. Bullet Points The split-design HD VTX mounting bracket is compatible with popular models like DJI O3 Air Unit, Walksnail Avatar HD Pro, and Caddx Vista. The side bracket, rubber damper vibration-damping design, lens holder, and antenna have all been reinforced to suppress low-frequency vibration and enhance the safety of HD VTX, ensuring a stable output of high-definition videos. Simply connect the VTX cable and complete the binding process to start flying. To safeguard the DJI O3 camera lens and maintain consistent high-definition video output during flight, both a lens filter and a lens protection mount are included. The battery slot and HD VTX mounting bracket duct height have been reduced to enhance the overall flying experience. DIY battery fixing methods are also supported, making them compatible with batteries of varying sizes and capacities. The new F4 2-3S 20A AIO FC V1 upgrades from F4 1S 12A FC V3, weighs only 5.92 grams, and is optimized for HD digital VTX. Its improved computing power, high response speed, and stable flight make it an ideal choice for HD whoops. The frame is constructed using PA12 material, known for its exceptional impact resistance and effortless installation process Specifications Items: Pavo Pico Brushless Whoop Quadcopter Color: Black Flight Time*: 4min Wheelbase: 80.8mm Battery*: LAVA 2S 450mAh 75C Battery FC*: F4 2-3S 20A AIO FC V1 Props: GF 45mm-3B Prop Motor: 1102 | 14000kv Motor Weight (without battery): 71.20g (O3), 65.88g (Vista), 66.02g (Walksnail Avatar) Frame: Pavo Pico Brushless Whoop Frame RX Version: Serial ELRS, TBS Supported HD Digital VTX: DJI O3 HD Digital VTX, Avatar HD Digital VTX, Vista HD Digital VTX, Runcam Link HD Digital VTX System Pavo Pico supports various types of HD VTX. DJI O3 and Walksnail Avatar Pro Kit both support HD digital VTX up to 1080P using dual-band transmission technology for better signal stability. The Vista Kit supports digital signal transmission for HD video up to 720P, with low latency and superior image quality performance. It's compact and lightweight, making it great for small drone installation, and compatible with various remote controls and monitors. The customized HD VTX mounting bracket has a split design, making it effortless to install for pilots DIY, and explore more possibilities while ensuring HD image quality. ND Filter for DJI O3 Camera BETAFPV ND Filter for DJI O3 Camera is specifically designed for the Pavo Pico Brushless Whoop Quadcopter. Meanwhile, the DJI O3 Air Unit ND Filters are tailored for the DJI O3 Air Unit and are capable of reducing the amount of light that enters the camera lens. With this feature, you can achieve slower shutter speeds or wider apertures when flying. These lightweight filters are crafted from high-quality optical class ensuring optimal image clarity and are too easy to install on the build. Pavo Pico Frame Kit We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera's installation height has been lowered with a protective printed part to limit its movable angle to within 30°. Additionally, an O3 filter can be used to protect the lens and enhance image quality. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD image output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage. Note: The O4 Air Unit Bracket is compatible with the Pavo20. For details or to purchase the bracket, check out the O4 Air Unit Bracket product page. Click to watch the installation guide video for the DJI O3 Air Unit on Pavo Pico. And The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount. DJI O3 Vibration Problem To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability. Troubleshooting: To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software. When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball. The Jello effect may occur during the above installation due to 2 reasons: The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose. If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary. Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller's rotation. Upgrade Low Profile Design After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop. Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow: Flight Controller We upgraded the FC from F4 1S 12A AIO FC V3 to F4 2-3S 20A AIO FC V1. The upgraded FC features an ESC with a pulse overcurrent capacity of 25A, ensuring stable operation of the flight controller even in the event of motor stalling. The addition of a 9V 2A BEC power supply ensures the stable operation of the DJI O3 HD VTX when the battery voltage is low. It also includes a DJI O3 6-pin PMU allowing for connection to HD VTX without soldering. It integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices. The redesigned solder pad layout and USB connector make installation and maintenance easier and more convenient. F4 1S 12A AIO FC V3(First Batch) F4 2-3S 20A AIO FC V1(Since Second Batch) Weight 4.23g 5.5g BEC 5V@3A for External RX 5V@3A for External RX 9V@2A for DJI O3 Connector for DJI O3 Not support Support ESC Current 12A 20A ESC Input Voltage 1-2S 2-3S Number of Serial Ports 2*UART, 1*SBUS 4*UART, 1*SBUS Note: The second batch of FC starts in August 2023. And If you use the F4 2-3S 20A AIO FC V1, the serial port of the SBUS receiver is UART5 while F4 1S 12A AIO Brushless FC V3 is UART6. We also have extended the USB port to the end for easier parameter adjustment and wiring. A new DJI O3 6-pin PMU has been added for convenient installation and maintenance. Powerful Propulsion System The 1102 | 14000kv motor brings stronger power and lower noise, delivering abundant thrust and impressive speed that enable effortless execution of aerial maneuvers. Paired with the high-performance Gemfan 45mm propeller, this powerful propulsion system achieves superb balance, ensuring powerful lift and stable flight, while also providing precise and responsive control. The combination of these powerful propulsion system makes it an excellent choice for Pavo Pico, allowing pilots to easily accomplish filming tasks. Carbon Fiber VTX Adapter We found that the installation dimensions of the Vista and Avatar HD Pro digital VTX modules closely match those of the O3 digital VTX. Thus, Installing a carbon plate with mounting holes that measure 20x20mm is sufficient to mount both digital VTXs. Install quickly and effortlessly, while meeting pilots' various DIY needs, and exploring more possibilities for flying. Pavo Series BETAFPV has been dedicated to enhancing the performance of the Pavo Cinewhoop Series through continuous optimization and upgrades. The Pavo Cinewhoop Series including Pavo25, Pavo30, and Pavo360, is designed to deliver exceptional results when it comes to capturing breathtaking and seamless footage. Additionally, these drones offer pilots an exhilarating flight experience that's bound to satisfy their cravings for adventure. Recommended Parts Motor: 1102 | 14000kv Brushless Motor Propeller: GF 45mm 3-Blade Propeller, GF 45mm 2-Blade Propeller Battery: LAVA 2S 450mAh 75C Battery, 450mAh 2S Battery FC: F4 1S 12A AIO FC V3, F4 2-3S 20A AIO FC V1 ND Filter: BETAFPV ND Filter for DJI O3 Camera Frame: Pavo Pico Brushless Whoop Frame Support HD Digital VTX: DJI O3 HD Digital VTX, Avatar HD Digital VTX, Vista HD Digital VTX, Runcam Link FAQ Click to download the FC firmware and CLI dump file(F4 1S 12A AIO FC V3) Click to download the FC firmware and CLI dump file(F4 2-3S 20A AIO FC V1) Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico Click to learn more about the BETA TEST: Sub100g Whoop Drone with DJI O3 RX Version: If you use the serial ELRS receiver, the serial port is UART3; if you use the SBUS receiver, the serial port is UART5; if you use other external receivers, the serial port is UART1; If you fly with the DJI controller and want to turn off the internal ELRS receiver on the board. Please reflash RX firmware, close the auto_WIFI_on_interval option, and select UART5. GyroFlow Stabilization: When using DJI O3 VTX to record video, it is recommended to turn off the electronic stabilization that comes with DJI O3 VTX, and use GyroFlow stabilization to obtain better picture effects. Click to download GyroFlow stabilization software. Battery DIY Instructions: The main body of the frame can be trimmed DIY, using battery straps or printed parts to fix larger batteries. Videos for Pavo Pico Brushless Whoop Quadcopter Package 1 * Pavo Pico Brushless Whoop Quadcopter 4 * GF 45mm-3B Propellers 1 * Type-C Adapter 1 * 5.8G VTX Antenna Packet 1 * VTX Bracket Screw Pack 2 * O3 Installation Bracket 2 * O3 VTX Antenna Mount 1 * 2S 450mAh Battery 1 * VTX Bracket (Vista/Avatar Version) 1 * 6P VTX Cable (Vista/Avatar Version) 1 * O3 UV Protector (O3 PNP Version) 1 * O3 Protector (O3 PNP Version) Note: The Camera and HD Digital VTX(DJI O3 HD Digital VTX, Walksnail Avatar HD Digital VTX, and Vista HD Digital VTX) are not included in all packages. you need to buy them separately.

USD 83.99

LiteRadio 3 Pro Radio Transmitter

LiteRadio 3 Pro Radio Transmitter—An open-source radio remote control that supports the EdgeTX system. It comes with the hall gimbals, featuring four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. The OLED display screen on the top of the transmitter brings visually instant data and a controlling interface to users. What's more, two optional internal RF systems and alternative external nano TX module make it a multi-protocol transmitter. The default firmware of the LR3 Pro (ELRS 2.4G) has been ELRS V3 since Nov 2023 instead of the previous version, ELRS V2.0. If you want to upgrade your old radio transmitter, please check this guidance. LiteRadio Collections Literadio 3 Pro radio transmitter is greatly enhanced its internal ELRS module output power up to 250mW, which enables LiteRadio 3 Pro to excellently adapt its controlling range. Reserving a nano bay for an external TX module, it supports many popular modules in the market and meets all the protocols such as MULTI, CRSF, PPM, XJT, DSM2, R9M, etc. Besides, the OLED display screen and operating system are newly added to it for better usability. LiteRadio 3 Pro LiteRadio 3 LiteRadio 2 SE Gimbal Sensor Hall Potentiometer (Hall replaceable) RF Output Power 50mW, 100mW, 250mW (ELRS) 100mW (CC2500) ≤100mW ≤100mW RF System CC2500 / SX1281 CC2500 / SX1280 CC2500 / SX1280 Battery 2000mAh 1S 2000mAh 1S 1000mAh 1S External TX Module Protocol MULTI, CRSF, PPM, XJT, DSM2, R9M, etc CRSF Not support Display Screen 1.3-inch Not support Not support Operating System EdgeTX LiteRadio System Note: When setting the ELRS version power to 500 mW, there might be a danger of packet loss at high temperatures. Please be careful using it. Bullet Point LiteRadio 3 Pro is a new milestone for LiteRadio Series so far. It is an open-source radio transmitter with the EdgeTX system. Therefore, you can try your best to customize it with the EdgeTx system. Hall gimbal features four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. Built-in 2000mAh 1S battery, LiteRadio 3 Pro can work up to 15 hours without an external module, bringing an excellent endurance performance. A 1.3-inch OLED display screen is newly installed. Controlled by two 5D buttons and settings are easy to be adjusted directly from the display screen. Internal ELRS TX module up to 250mW output power enables LiteRadio 3 Pro to excellently adapt its controlling range. Reserving a nano bay for an external TX module, it supports many popular modules in the market and meets all the protocols such as MULTI, CRSF, PPM, XJT, DSM2, R9M, etc. Highly recommend BETAFPV ELRS Nano TX Module and other brands of nano TX modules are also available. ExpressLRS 2.4G and CC2500 protocol options. The CC2500 supports Corona, Hitec, Futaba S-FHSS, Frsky D, X, RadioLink, Graupner HoTT, etc protocols. Specification Item: LiteRadio 3 Pro Radio Transmitter Channel: 8 Channels Gimbal: Hall Sensor Frequency Range: 2.4G RF System: SX1280 / CC2500 Antenna: Internal Antenna RF Output Power: 50mW, 100mW, 250mW (ELRS 2.4G) / 100mW (CC2500) Screen: 1.3 inch OLED display screen Protocol Option: ExpressLRS 2.4G / CC2500 (Frsky D, Frsky X, SFHSS) Battery: Built-in 2000mAh 1S Battery Operating system: EdgeTX Port: Type-C USB 3.0 port / 3.5mm Audio port USB Support: Most Practice Simulator / USB charging / Firmware update / Passthrough (ELRS 2.4G) Recommend External TX Module: ELRS Nano TX Module Recommend Accessories: Nano Gimbal for LiteRadio 3 Pro, Storage Case, Transmitter Neck Strap EdgeTX Official Supported LiteRadio 3 Pro Radio Transmitter—An open-source radio remote control that supports the EdgeTX system, which is an open-source firmware for RC radio transmitters. The firmware is highly configurable and brings much more features than traditional radios. Therefore, you can try your best to customize LiteRadio 3 Pro such as language, voice and etc with the EdgeTX system. Note: Please click here to know more about EdgeTX operating system. OLED Display Screen OLED display screen with two 5D buttons is newly added to LiteRadio 3 Pro radio transmitter. Users can adjust the TX settings such as switching internal/external modules, gimbal calibration and binding on the screen by controlling 5D buttons. Compared with LiteRadio 3, it is easier to adjust such settings and very friendly to a new player. EdgeTX Passthrough for ELRS Upgrade With EdgeTX operating system, flashing ExpressLRS internal TX modules is easier for everyone. First, there is no need to disassemble the case. Compared with upgrading by WIFI, it is more convenient, fast, and stable to flash ELRS internal TX firmware by using EdgeTX passthrough flashing. Note: Please click here to know the upgrading steps. The passthrough is only used for ELRS 2.4G version. Currently, BETAFPV is actively communicating with the ExpressLRS official team on the latest ExpressLRS configurator to support flashing LiteRadio 3 Pro ELRS TX firmware. External TX Module Nano module bay enables the external TX module available. LiteRadio 3 Pro reaches a high level with its capability to support multi-brand external TX modules in the market for different protocols such as MULTI, CRSF, PPM, XJT, DSM2, and R9M, etc. BETAFPV ELRS Nano TX Module, which features a high refresh rate, ultra-low latency, and long-range, is strongly recommended for LiteRadio 3 Pro. Note: If you are ready to install the TBS external nano module, the TBS nano module case size should be 64*42*25mm, the thicker one of the retrofit cases. Hall Gimbal Features four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. With an adjustable stick end, it perfectly fits thumbs and greatly improves the stick feel for the control. Hall Effect provides contactless sensing for not only accurate control inputs and precise centering but also durable use. Diagram of LiteRadio 3 Pro Top view Front view Back view Below is the diagram of LiteRadio 3 Pro. Power button: Long press to turn on/off Bootloader Button: Turn off the radio transmitter. Press the Bootloader button and Power button simultaneously. Releasing the two buttons at the same time will enter the Bootloader interface. Black Toggle Switches: Toggle to activate the trimming function of the remote control joystick. Left 5-D Button: Toggle the button up/down/left/right to trim the joystick. Press the button to exit/return. Right 5-D Button: Toggle the button up/down/left/right to select and move. Press the button to confirm/enter. Switching Protocol and Binding Radio transmitter settings and binding for ELRS 2.4G version are shown below. Please turn on Internal and External RF protocol at the same time when using the internal ELRS TX module. (With ExperssLRS 2.4G sticker on the Nano module bay.) Set External RF mode on OFF. Turn on Internal RF and select CRSF mode. Binding: Enter the ExpressLRS.lua interface, and select Bind to complete linking. Radio transmitter settings and binding for CC2500 version are shown below. (With CC2500 sticker on the Nano module bay.) Turn off External RF Turn on Internal RF and select the corresponding protocol under MULTI mode. Binding: Select Bind to complete linking on the interface. Radio transmitter settings are shown below when installing and using the external TX module. Turn off Internal RF. Turn on External RF. Select the correct protocol type based on the external TX module. Binding: Please refer to the corresponding manual according to the external TX module. Gimbal Calibration Enter calibration mode Complete the calibration with prompts Note: Please do not move the joysticks too hard during the calibration process, otherwise, calibration accuracy will be affected. Please move the joysticks slightly during the calibration process. Exit calibration mode Firmware Upgrade WiFi upgrading for ELRS is shown below. Enter ELRSV2.lua interface Select WiFi Connectivity Connect WiFi via computer or mobile phone WiFi Name: ExpressLRS TX WiFi PWD: expresslrs Upgrade firmware on ExpressLRS official site EdgeTX Passthrough flashing for ELRS. Now ExpressLRS official firmware V2.5.0 is released and supports BETAFPV LiteRadio 3 Pro radio transmitter. You can download it for flashing. Firmware: https://github.com/ExpressLRS/ExpressLRS/releases/tag/2.5.0 ExpressLRS Configurator: https://github.com/ExpressLRS/ExpressLRS-Configurator/releases/tag/v1.4.1 Recommended Parts We highly recommend buying LiteRadio 3 Pro Radio Transmitter with the parts listed below. External TX Module: ELRS Nano TX Module Strap: BETAFPV LiteRadio Transmitter Neck Strap Gimbal: Nano Gimbal for Lite Radio 3 Pro Storage case: BETAFPV Storage Case for LiteRadio 3 Pro FAQ Download the manual for LiteRadio 3 Pro radio transmitter. Package 1 * LiteRadio 3 Pro Radio Transmitter 1 * User Manual 2 * Joystick Protective Covers 1 * USB Type-C Cable

USD 89.99

F4 1S 5A AIO Brushless Flight Controller

The F4 1S 5A AIO Brushless Flight Controller is back in stock with new and upgraded features. The new board integrates Serial ExpressLRS 2.4G receiver. Compared with the original built-in SPI ELRS 2.4G receiver, it could flash the newest ELRS official firmware like V3.0 easily. Also, we updated the FC with high-quality BMI270 gyro, BB51 ESC hardware with Bluejay ESC firmware, and 8MB Betaflight Blackbox flash. Please click here to F4 1S 5A AIO (SPI ELRS 2.4G) if you need information about it. Tons of ExpressLRS items are available now! Two version choices for the FC board. Weighing only 2.96 grams, the Light version comes with NO motor connectors soldered. Therefore, pilots could directly solder the motor cables to the FC board, getting an ultimate lightweight drone for fast speed FPV racing. Light Version Classical Version Weight 2.96g 3.64g Board Thickness 0.8mm 0.8mm Motor Connectors Not Solder Soldered Bullet Point Come with a Serial ExpressLRS 2.4G receiver, which can be updated via Wi-Fi or Betaflight serial passthrough. It is convenient for pilots to flash any version of ELRS RX firmware and especially can flash ExpressLRS V3.0 without updating flight controller firmware. The SPI Frsky version board reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers. Built-in an 8MB flash memory chip dedicated to Blackbox logging. It’s an extremely powerful tool for tuning and troubleshooting an FPV drone. Particular design with a weight of 3.64g (Classical) and 2.96g (Light), reasonable layout, and easy to build. With a 26*26mm mounting hole size, it is fully compatible with the whoop frame in the current market. The Light version requires soldering motor wires to the pad directly, which allows lower resistance for more current on motors. It also comes with motor pin connectors for convenience to use. Specification of FC CPU: STM32F411CEU6 (100MHZ) Six-Axis: BMI270 Built-in Receiver: Serial ExpressLRS 2.4G/SPI CC2500 (Frsky) Receiver antenna: Line antenna FC Size: 30*30mm Mounting Hole Size: 26*26mm Firmware version: betaflight_4.3.0_BETAFPVF411 (ELRS)/betaflight_4.2.11_BETAFPVF411RX (Frsky) OSD: Built-in BetaFlight OSD Blackbox: 8MB Recommend VTX: >=200mW, like BETAFPV M03 350mW VTX or TBS Unify VTX Power Cable: 55mm, with BT2.0 connector Weight: 2.96g (without motor connectors) / 3.64g (with motor connectors), excluding power cable Specification of ESC Power supply: 1S Current: 5A continuous and peak 6A (3 seconds) ESC firmware: A_X_5_.HEX for Bluejay BB51 hardware Signal Support: D-shot300, D-shot600 Diagram Below is the diagram for Serial ELRS 2.4G RX. The diagram for the Classical and Light versions is the same. Below is the diagram for SPI Frsky RX. The diagram for the Classical and Light versions is the same. Serial ELRS 2.4G RX Serial ELRS 2.4G RX uses the Crossfire serial protocol (CRSF protocol) to communicate between the receiver and the flight controller board. So the Serial ELRS 2.4G RX is available to support upgrading to ELRS V3.0 with no need to flash Betaflight flight controller firmware. Enter binding status by power on/off three times. Plugin and unplug the flight controller three times; Make sure the RX LED is doing a quick double blink, which indicates the receiver is in bind mode; Make sure the RF TX module or radio transmitter enters binding status, which sends out a binding pulse; If the receiver has a solid light, it's bound. The Serial ELRS 2.4G RX can be updated via Wi-Fi or Betaflight serial passthrough. Here is the way to update the Serial ELRS 2.4G RX firmware through passthrough. Plug in your FC to your computer, but do NOT connect to betaflight configurator. Choose target "BETAFPV 2.4GHz AIO RX". Flash using the BetaflightPassthrough option in ExpressLRS Configurator. How to flash firmware via Wi-Fi here. SPI Frsky RX Come with the built-in SPI Frsky Receiver (CC2500 chip), F4 1S 5A AIO FC can be compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. The default protocol is configured to Frsky D16 FCC out of the factory. Pilots could set up the protocol according to your own need in Betaflight Configurator. Configuration Protocol FRSKY_D Frsky D8 FRSKY_X Frsky D16 FCC (ACCST 1.X version) FRSKY_X_LBT Frsky D16 LBT (ACCST 1.X version) SFHSS Futaba S-FHSS How to Bind with Betaflight FC with SPI Frsky Receiver. Betaflight Firmware and CLI F4 1S 5A AIO Brushless Flight Controller comes with the default firmware betaflight_4.3.0_BETAFPVF411 (ELRS) or betaflight_4.2.11_BETAFPVF411RX (Frsky). The default firmware for Serial ExpressLRS 2.4G RX version supports ELRS V2.4 RX. Pay attention, For the Serial ExpressLRS 2.4G version, ONLY the Betaflight firmware 4.3.0 and up start to support this BMI270 gyro. For the SPI Frsky version, DO NOT flash the other firmware, otherwise, the RX will be lost in control at a very close range. We have already built our own firmware betaflight_4.2.11_BETAFPVF411RX for SPI Frsky RX version to support BMI270 gyro. Please check the below link to download the firmware. Download the firmware and CLI dump file for the F4 1S 5A FC ELRS/Frsky board. (Both Light and Classical versions share the same firmware) Note: The RX RSSI values drop when the flight controller is installed on the quadcopter with HD digital VTX (Walksnail or HDZero). For example, the theoretical failsafe RSSI values for 250Hz packet rate are -108dBm. Actually, the RX will be possibly lost in control when the RX RSSI values reach about -92dBm. Bluejay ESC Firmware F4 1S 5A flight controller with BB51 ESC hardware could flash the Bluejay ESC firmware now, which is based on BLHeli_S revision 16.7. With Bluejay ESC firmware, it supports bidirectional D-shot and RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies. By using Bluejay ESC firmware on Meteor65 and Meteor65 Pro whoop drones with 0802SE 19500KV motors, the flight time is increasing effectively. The default firmware for F4 1S 5A FC will be changed to Bluejay ESC firmware. For pilots who want to flash Bluejay ESC firmware for F4 1S 5A FC, please use the BLHeliSuite16714902A_Beta or ESC-Configurator and download Bluejay ESC firmware A_X_5_.HEX from the below links. (Both Light and Classical versions share the same firmware) ESC-Configurator: https://preview.esc-configurator.com/ Download BLHeliSuite16714902A_Beta here. Download the Bluejay ESC firmware. Please choose A_X_5.HEX. Note: Only SPI ELRS 2.4G version supports motor direction set through Betaflight Configurator and SPI Frsky version does not support it. BLHeli Configurator and Bluejay Configurator are invalid for the BB51 ESC (both versions). Connecting External RX/HD Digital or Analog VTX Both Serial ExpressLRS 2.4G RX and SPI Frsky RX version support external HD digital VTX or Analog VTX. Please note that the SPI Frsky RX version reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers. You can refer to the below picture. The diagram is the same for Classical and Light version. Recommend Parts Battery: BT2.0 300mAh 1S Battery Frame: Meteor65 frame / Meteor65 Pro frame / Meteor75 frame Props: 31mm 4-Blades props (for 65mm frame) / 35mm 3-blade props (for 65mm frame) / 40mm 4-blades props (for 75mm frame) Motors: 0802SE motors / 1102 brushless motors VTX: M03 25-350mW VTX Package 1 * F4 1S 5A AIO Brushless Flight Controller (ELRS or Frsky) 4 * M1.2x4mm Screws 4 * M1.4x5mm Screws 4 * Anti-vibration Rubber Dampers 8 * Motor Pin Connectors (Light version included)

USD 39.99

Meteor75 Pro Brushless Whoop Quadcopter (2022)

Meteor75 Pro comes with a 45mm propeller for power improvement and a flexible flying experience. Beyond that, it has almost the same components and features as Meteor75, like F4 1S 5A FC (2022) with built-in serial ExpressLRS 2.4G, Frsky, or TBS RX version, up to 350mW M03 VTX, 19500KV 0802SE motors, C03 FPV camera etc, All aspects of performance are perfectly balanced. Bullet Points The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks. It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter. Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones. Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone. The various colors of the spare parts including the Meteor75 Pro frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones. Specifications Motors: 1102 22000KV Motor Battery: BT2.0 550mAh 1S Battery Frame: Meteor75 Pro Brushless Whoop Frame Propellers: Gemfan 45mm 3-Blade Propellers Camera: C03 FPV Camera Tilt: 30°/20° Canopy: Canopy for Micro Camera 2022 version FC&ESC: F4 1S 5A Flight Controller Receiver: Integrated Serial ELRS 2.4G VTX: M03 Flight time: 6:30 Weight: 31g Powerful 1S Drone Combo Meteor75 Pro with 45mm 3-Blade props performs very precise, agile, and fantastic flying, which is the largest 1S power whoop drone nowadays. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, Meteor75 Pro has an excellent thrust-to-weight ratio performance. Flight Controller The latest F4 1S 5A flight controller is applied to all BNF versions of Meteor75 Pro. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC. Meteor75 Pro (ELRS) Meteor75 Pro (Frsky, PNP, TBS) FC Inside F4 1S 5A FC (Serial ELRS 2.4G) V2.0 F4 1S 5A FC (SPI Frsky) V3.0 Gyro BMI270 BMI270 FC Firmware BETAFPVF411 BETAFPVF411RX UART Port One UART Port Two UART Ports External RX Not Supported Supported Note: For Serial ELRS 2.4G, the Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For SPI Frsky, DO NOT flash the other firmware, otherwise, the RX will be lost in control at a very close range. Please flash betaflight_4.2.11_BETAFPVF411RX firmware built by BETAFPV for SPI Frsky. C03 FPV Camera C03 is a lightweight 1.45g and 1200TVL resolution camera that has been designed to provide superb performance for micro FPV quadcopters. It has a 2.1mm lens that gives a 160° field of view, operating in 4:3 image ratios, and features a 1/3'' CMOS sensor for clear and brilliant images. Endurance Boosting Battery Meteor75 Pro applies the new BT2.0 550mAh 1S battery, which is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). With its larger capacity and stronger power, pilots can enjoy more flight time and a robust flight experience. Meteor75 Pro Frame Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately. Meteor Series BETAFPV aims to provide the best whoop quadcopters for pilots and Meteor Series whoop quadcopters are definitely the perfect balance in all areas of performance. From 1S to 2S, indoors to outdoors, whether agility, maneuverability, speed, or stability, Meteor series whoop drones meet the needs of a variety of flight environments and offer excellent experiences to pilots. The latest Meteor75 Pro with 45mm props, being the largest 1S whoop, is proud of its performance both indoors and outdoors. Recommended Parts Radio Transmitter: LiteRadio 3 Pro, LiteRadio 3, LiteRadio 2 SE Battery: BT2.0 550mAh Battery, BT2.0 450mAh Battery Props: Gemfan 45mm 2-Blade&3-Blade Propellers (1.5mm Shaft 4PCS) Colorful Frame: Meteor75 Pro Brushless Whoop Frame Colorful Canopy: Canopy for Micro Camera 2022 Sticker: BETAFPV Waterslide Decals Charger: 6 Ports 1S Battery Charger & Adapter Screws: Meteor Series Motor Fixing Screws Pack (40PCS) BT2.0 Series Accessories FAQ Download the FC firmware and CLI dump file for Meteor75 Pro Attention Please note that warranty claims are limited to DOA (Dead on Arrival) units and manufacturer defects only. The product must be free from physical damage, scratches, missing components, or modifications. Crashes, improper handling, modifications, power surges, electrical fires, or water exposure will void the warranty. Physical crash damage is not covered under any circumstances. For further assistance, please contact our technical support team. Package 1 * Meteor75 Pro Brushless Whoop Quadcopter (2022) 2 * BT2.0 550mAh 1S Battery 1 * Type-C USB Cable 1 * BT2.0 Battery Charger and Voltage Tester 4 * 45mm 3-Blade Props (1.5mm Shaft) 1 * Screwdriver 1 * Pack of Screws 1 * Accessories for Canopy usechatgpt init success

USD 109.99

What BETAFPV coupons are available today?

We track so many discount codes. Read about today's BETAFPV coupon statistics.

BETAFPV deals available today

Active BETAFPV codes

5% off

Biggest discount available

Get the best BETAFPV promo codes and coupons that actually work. Our community of sustainability minded shoppers helps you save by testing and sharing:

Verified promo codes with live success rates from recent shoppers!
Exclusive single-use codes shared by our community (24 active codes).
Drop alerts when BETAFPV's most popular items go on sale!
Deals for those who want extra savings opportunities
Insider savings tips from experienced BETAFPV shoppers who know the best deals.

Why TerraCoupons finds better BETAFPV discounts:

Live success tracking: See exactly which codes are working for other shoppers right now
Real-time feedback: Every code attempt is tracked and ranked to show you the best options first
Sale predictions: Get alerted when BETAFPV's next big discount event is coming
Exclusive savings: reseller discounts, shopping tips and sustainability tips you won't find elsewhere

Note: Our community tests every BETAFPV promo code and shares results in real-time. Check success rates and shopping tips in the activity feed to find what works best for your purchase.

5% off

721 uses

high

worked 4 days ago

5% Off Storewide at BETAFPV

Free gift

191 uses

high

worked 4 days ago

Free Gift Select Items at BETAFPV

20% off

5 uses

medium

worked 7 months ago

Save 20% off with promo code

20% off

4 uses

medium

worked 7 months ago

Take 20% off with coupon code

More BETAFPV Products

BETAFPV Dipole T Antenna

The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the correct status. A ton of ExpressLRS items are available now! Specification Coaxial cable length: 46mm/80mm Antenna width: 60mm Weight: 0.94g Connector: IPEX MHF Gain: 2dBi VSWR: <1.4 (2.4G version) / <1.6 (915MHz/868MHz version) Which antenna should I choose? Are these antennas compatible with other receivers like Frsky or TBS receivers? First, it is compatible with any receiver with an IPEX MHF connector. Note that do NOT use the antenna with the wrong frequency. Even they look almost the same outside, but different balun circuit inside. It will have totally different performance in the wrong frequency point. Second, the shorter 915MHz/868MHz antenna is just made for small whoop drones. If you expect full-range performance, highly recommend the longer version. The BETAFPV dipole T antenna is omnidirectional. Below is the antenna 3D radiation pattern image. RF Antenna Balun What is a Balun and why should we use it in these dipole T antennas? In order for these balanced antennas to be fed by coaxial cable, an antenna balun is often included at the feed point. For more details, please check this article "What is a Balun: RF Antenna Balun". For the dipole T antenna, the balun circuit is in the injected rubber enclosure. For the different antennas, there is a related balun circuit. Package 2 * BETAFPV T antenna

USD 6.99

Meteor75 Pro Brushless Whoop Frame

Built for the largest 1S brushless quadcopter with seven colors for choice. Featuring motor holders for convenient installation, and it has an improved battery slot, which makes a larger capacity 1S battery available. This really does improve stability and smoothes out the flight. Fit out with F4 1S 5A FC, 1102 and 45mm propellers, Meteor75 Pro Brushless Whoop Frame has an excellent thrust-to-weight ratio performance suitable for 1S HD whoop. Note: On the Way, Stay Tuned! Meteor75 Pro Brushless Quadcopter with Analog VTX or HD Digitial VTX is coming soon. Bullet Point Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g. The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802SE Brushless Motors. The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S Battery, BT2.0 550mAh 1S Battery. The frame is perfect for 45mm propellers like Gemfan 45mm 2-Blade/3-Blade props. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX. The Meteor75 Pro frame is completely an upgrade choice for pilots who fly Meteor65, Meteor 65 Pro, or Meteor 75 brushless quadcopter. The electronic parts are compatible with it such as the F4 1S 5A flight controller. Just purchase 45mm props and recommend 1102 motors for more power. Specification Item: Meteor75 Pro Brushless Whoop Frame Material: PP Wheelbase: 80.8mm Weight: 7.73g Color: Black/Blue/Cyan/Yellow/Orange/White/Red Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802SE Brushless Motors FC mounting hole: 26*26mm, F4 1S 5A FC Larger 1S Drone Combo Meteor75 Pro Frame with 45mm 2-Blade or 3-Blade props performs very precise, agile, and fantastic flying. It is compatible with parts on the 1S Meteor series whoops and is super easy to swap and upgrade build. With 45mm propellers, it is the largest 1S power whoop drone nowadays. It might be perfect for HD VTX indoors. Please click to purchase 45mm 2-Blade or 3-Blade Propellers. From Meteor75 to Pro Meteor75 Pro frame is larger than the classical Meteor75. It is suitable for 45mm propellers, which makes Meteor75 Pro the largest 1S power whoop currently. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. The battery slot is enhanced to a wider size of 16.7mm. Meteor75 Pro frame supports 450mAh, 550mAh 1S battery. Recommend using BT2.0 450mAh 1S Battery BT2.0 550mAh 1S Battery, and other brand batteries that can fit the slot. Recommended Parts Propellers: 45mm 2-Blade/3-Blade Props Motors: 1102 Brushless Motors, 0802SE Brushless Motors Batteries: BT2.0 450mAh 1S Battery, BT2.0 550mAh 1S Battery (4PCS) Canopy: BETAFPV Micro Canopy, Micro Canopy for HD Camera Screws: Meteor Series Motor Fixing Screws Pack (40PCS) FC: F4 1S 5A FC Package 1 * Meteor75 Pro Brushless Whoop Frame

USD 4.99

FPV Whoop Racing Advanced Kit (BF Edition)

BETAFPV Advanced Kit 2 - the best RTF kit for the drone starter as well as FPV pros to practice indoor. The special design of the Meteor75 Lite brushless drone, brand-new LiteRadio 2 SE Transmitter and VR01 FPV Goggles, bring you an unforgettable flight experience. To thanks customers' support and love, BETAFPV specially offers BF Edition on this Black Friday holiday. Bullet Points Brand-new all-black appearance, this kit brings a stronger sense of wholeness, perfect fit the Black Friday holiday. Due to the popularity of the Meteor series, we especially put the new meteor 75 lite into our advanced kit. It's a lightweight 1S whoop quadcopter, only weighs 28.8g, and is simple to operate. With the high-performance FC and motors, it gives pilots plenty of power and control both indoor and outdoor flying. Special offered LiteRadio 2 SE Transmitter instead of LiteRadio 2, it is also super easy to bind and operate, perfect for the beginner or experienced FPV racer. With a built-in 1000mah 1S battery, LiteRadio 2 SE Transmitter has an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. BETAFPV VR01 FPV Goggles has a 4.3 inches 800*480px HD high brightness LCD screen, specially tuned for FPV racing or Model aircraft. The ergonomic design features a foam sponge faceplate and a three-sided adjustable headband. These FPV Goggles fit your face and head perfectly. This simple and clear user manual has all you need to get fly quickly. The FPV whoop racing advanced kit 2 is a really great Ready To Fly kit to get everyone started indoor and outdoor FPV racing, freestyle or just easy cruising. All parts are stored in a special customized carry case, which provides better protection and is easy to carry. Meteor75 Lite Drone For getting a cool appearance and to increase durability, we specially redesigned the Meteor75 frame. It makes the meteor75 lite looks refreshing and unique. Also, meteor75 lite is the first drone that is equipped with Lite 1-2S Brushless FC which integrates 25mW VTX, supports the Frsky D8 protocol. Featured 1102-18000KV Motor and Gemfan 40mm 3-blade propeller, pilots can get great speed and power. Comes with BT2.0 connector, lots of problems of Ph2.0 connector like voltage sag has been solved perfectly, pilots can enjoy 3-4 minutes flight with BT2.0 450mAh 1S battery. Special offers the replace frame - Meteor75 Frame. LiteRadio 2 SE Transmitter Compared with LiteRadio 2 Transmitter, LiteRadio 2 SE Transmitter is a better choice for FPV racing starters. This radio is not only fully compatible with the Frsky D8 protocol, powered by OpenTX firmware, support firmware upgrade and simulator mode but also updates with remote calibration. What's more, come with a built-in 1000mah 1S battery, LiteRadio 2 SE Transmitter has an excellent endurance performance which can up to 8 hours, bings pilots a better flight experience. (The default version is the Frsky D8.) VR01 FPV Goggles BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inches 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like cotton, and suitable for all age ranges. Noticed: Pilots can change the OSD and VTX setting from the Goggle. Spare Parts List Comes with spare parts including 2 pcs BT2.0 450mAh battery, 1pc BT2.0 battery charger&tester, super portable for charging. What's more, the Batteries, USB charger and Spare parts for easy repairs. We also provided 4 props and 1 prop removal tool, convenient to exchange the props. FAQ Special thanks for the tutorial of Buddy RC, it is a great help for fans to bind the LiteRadio 2 (Also suit for LiteRadio 2 SE Transmitter) to the Meteor75 Lite (If you have trouble on how to bind, this will help you a lot.) The video also shows how to change the video transmitter channel and power and the flight modes of the quad! Manual for the Lite 1S FC, pls kindly check Full user manual to download Package 1 * Meteor75 Lite Brushless Whoop Drone 1 * LiteRadio 2 SE Transmitter 1 * BETAFPV VR01 FPV Goggles 4 * Gemfan 40mm 3-blade Propeller(1.5mm Shaft)(Black) 1 * USB Charging Cable 2 * Dipole 5.8G Antennas 1 * BT2.0 Battery Charger & Tester 2 * BT2.0 450mAh battery 1 * Props Removal Tool 1 * User Manual 1 * Customized EVA Carry Case

USD 199.99

FPV Whoop Racing Advanced Kit 2

We are sorry to announce that the FPV Whoop Racing Advanced Kit 2 was sold out. We highly recommend the Cetus FPV kit that is more suitable for getting started with the FPV hobby. Meteor65 lite, with classical Silverware firmware, is the best 1S whoop Drone for indoor flying. There is no doubt that Meteor65 Lite is a perfect spare quadcopter for the Advanced Kit 2 owner. Pilots can use the radio transmitter and goggles with this smaller and more flexible 65mm Whoop Quad to get an amazing indoor flight experience! BETAFPV Advanced Kit 2 - the best RTF kit for the drone starter as well as FPV pros to practice indoor. The special design of the Meteor75 Lite brushless drone, remarkable LiteRadio 2 SE transmitter, and VR01 FPV Goggles bring you an unforgettable flight experience. Please Kindly Note: If the frame is deformed before flying, please adjust the frame to its normal shape first. Ensure that the propellers won't scratch against the frame duct and the motors could spin smoothly. If the drone crashes or garbage rolls into the prop, pull the SA switch on the radio transmitter immediately. Special thanks for the review of Justin Davis, it is a great help for fans to make the right value choices. Bullet Points Due to the popularity of the Meteor series, we especially put the new meteor 75 lite into our advanced kit. It's a lightweight 1S whoop quadcopter, only weighs 28.8g, and is simple to operate. The high-performance FC and motors can offer the quadcopter plenty of power and control both indoor and outdoor flying. LiteRadio 2 SE transmitter is super easy to bind and operate, perfect for the beginner or experienced FPV racer. It has an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, make it more ergonomic. BETAFPV VR01 FPV Goggles has a 4.3 inches 800*480px HD high brightness LCD screen, specially tuned for FPV racing or Model aircraft. The ergonomic design features a foam sponge faceplate and a three-sided adjustable headband. These FPV Goggles fit your face and head perfectly. This simple and clear user manual has all you need to get fly quickly. The FPV whoop racing advanced kit 2 is a really great Ready To Fly kit to get everyone started indoor and outdoor FPV racing, freestyle, or just easy cruising. All parts are stored in a special customized carry case, which provides better protection and is easy to carry. Meteor75 Lite Drone For getting a cool appearance and to increase durability, we specially redesigned the Meteor75 frame. It makes the meteor75 lite look refreshing and unique. Meanwhile, meteor75 lite is the first drone that is equipped with Lite 1S Brushless FC, which supports the Frsky D8 protocol. Featured 1102-18000KV Motor and Gemfan 40mm 3-blade propeller, pilots can get great speed and power. Comes with BT2.0 connector, lots of problems of Ph2.0 connector like voltage sag has been solved perfectly, pilots can enjoy 3-4 minute flight with BT2.0 450mAh 1S battery. Special offers the replacement frame - Meteor75 Frame. LiteRadio 2 SE Transmitter Designed for FPV racing starters, the LiteRadio 2 SE transmitter comes with a built-in 1000mah 1S battery, having an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, it is more ergonomic. VR01 FPV Goggles BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inches 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like cotton, and suitable for all age ranges. Noticed: Pilots can change the OSD and VTX setting from the Goggle. Spare Parts List Comes with spare parts including 2 pcs BT2.0 450mAh battery, 1pc BT2.0 battery charger&tester, super portable for charging. What's more, the Batteries, USB charger, and Spare parts for easy repairs. We also provided 4 props and 1 prop removal tool, convenient to exchange the props. FAQ Manual for the Lite 1S FC, pls kindly check Full user manual to download Manual for LiteRadio 2 SE Radio Transmitter Package 1 * Meteor75 Lite Brushless Whoop Drone 1 * LiteRadio 2 SE transmitter 1 * TypeC Adapter 1 * BETAFPV VR01 FPV Goggles 4 * Gemfan 40mm 3-blade Propeller(1.5mm Shaft) 1 * USB Charging Cable 2 * Dipole 5.8G Antennas 1 * BT2.0 Battery Charger & Tester 2 * BT2.0 450mAh battery 1 * Props Removal Tool 1 * User Manual 1 * Customized EVA Carry Case

USD 199.99

20% off

3 uses

medium

worked 6 months ago

Save 20% off with discount code

5% off

3217 uses

low

worked 4 months ago

5% Off Storewide at BETAFPV

5% off

587 uses

low

worked 4 months ago

5% Off Pavo360 Fpv Quadcopter at BETAFPV

5% off

821 uses

low

worked 9 months ago

5% Off Gift Cards at BETAFPV

Sustainability Score

42%

BetaFPV shows limited transparency regarding their environmental and social practices. While they comply with basic electronic waste regulations, they lack clear sustainability initiatives or published ESG reports. Their manufacturing processes and supply chain details remain largely undisclosed, and they have not made public commitments to reducing their environmental impact. The company could improve by implementing clear sustainability policies and being more transparent about their practices.

About BETAFPV

3.0 (1)

FAQs

: BetaFPV usually offers major sales during Black Friday/Cyber Monday, Christmas, and their anniversary in July. They also frequently run flash sales and seasonal promotions throughout the year.
: Currently, BetaFPV does not offer specific student discounts, but they do provide bulk purchase discounts and occasional promotional codes through their newsletter.
: The best time to purchase is during Black Friday sales (November) when discounts can reach up to 30%. Their July anniversary sale is another excellent opportunity for significant savings.
: BetaFPV does not officially price match with other retailers, but they maintain competitive pricing in the market.
: In the past month, BETAFPV has launched 8 new promo coupons for shopper discounts. This indicates that BETAFPV provides regular opportunities for customers to save money on their purchases.
: On average, BETAFPV provides 4 discount coupons each month. Based on historical data, the average time between BETAFPV coupon releases every 8 days. However, this rate depends on various factors such as seasonal promotions (Black Friday, Cyber Monday, etc.), product launches, or other marketing initiatives. To stay informed about upcoming discounts and promotions, we recommend checking BETAFPV website regularly, subscribing to email newsletters, and following them on social media.
: BETAFPV is offering 6 working store-wide codes, however they are also offering 18 additional discount codes with a best discount of 5% off
: terra.coupons is the #1 provider of discount codes for your favorite retailers, such as BETAFPV. As a crowd-sourced platform for coupon codes, we accurate codes for over 10,000 stores. Save time and avoid expired codes by checking terra.coupons for the latest BETAFPV discount codes.

Curated by

Linda S.

Content Writer

Last updated September 2025

This page was curated by Linda, a savings and discount enthusiast from sunny Sarasota, Florida. With a keen eye for unbeatable deals, Linda ensures that all codes are checked and curated daily. She's also a certified yoga instructor who loves to share wellness tips. Check back tomorrow for more savings and perhaps a little zen!

Latest BETAFPV coupon activity

Track real-time BETAFPV coupon activity from our community. See which codes are working right now at BETAFPV, when they were last verified, and any usage restrictions. Our feed helps you quickly find active codes and avoid expired ones.

From the blog

2025-04-29

BETAFPV Promo Codes and Coupons September 2025

BETAFPV

Today's BETAFPV discount codes

Featured BETAFPV Products

Pavo Pico Brushless Whoop Quadcopter

LiteRadio 3 Pro Radio Transmitter

F4 1S 5A AIO Brushless Flight Controller

Meteor75 Pro Brushless Whoop Quadcopter (2022)

What BETAFPV coupons are available today?

More BETAFPV Products

BETAFPV Dipole T Antenna

Meteor75 Pro Brushless Whoop Frame

FPV Whoop Racing Advanced Kit (BF Edition)

FPV Whoop Racing Advanced Kit 2

Sustainability Score

About BETAFPV

FAQs

Curated by

Linda S.

Latest BETAFPV coupon activity

From the blog

How to Negotiate Lower Bills on Subscriptions and Monthly Services

Unlock Huge Savings: Get the Best Soundboks Discount Today!

The Best Time to Buy Electronics, Clothes, and More: A Year-Round Savings Calendar